Weld on mount for winching or using as a tow point. This is a must have recovery item. These mounts can be welded to bumpers or cages.

Specifications:
Material: 1018 hot rolled steel
Length: 2.5 inches
Width: 3 inches
Thickness: 1 inch
Hole Diameter: 7/8 inch

Weld on mount for winching or using as a tow point. This is a must have recovery item. These mounts can be welded to bumpers or cages. These are quite long so they can actually be inserted through rectangular tube bumpers and welded front and back.

Specifications:
Material: 1018 hot rolled steel
Length: 4.5 inches
Width: 3 inches
Thickness: 1 inch
Hole Diameter: 7/8 inch

Heavy duty receiver shackle mount made from solid steel. Designed to with stand the exteme demands of recovery and towing operations. These are approximately 3 times stronger than cast parts. Features two 5/8 inch through holes for attaching to the receiver hitches and one 7/8 inch hole for a shackle pin.

Kit Includes:
1 Receiver
1 Bow shackle 4.75 Ton

Specifications:
Material: 1018 cold rolled steel
Finish: Clear zinc
Length: 6.125 inches
Width: 2 inches
Thickness: 2 inch
Weight: 5.14 pounds

This is a must have recovery item. Attach them to your bumper mounts or winch rope/cable. Colors vary: silver ring / silver pin or blue ring / silver pin.

Specifications:
Load Rating: 9500 lbs
Pin Diameter: 7/8 inch
Ring Opening: 1 1/4 inch
Coating: Galvanized and/or powder coated

Heavy duty recovery pull/tow mounts. Designed to bolt on to the rear of 1976-1986 Jeep CJ-5, CJ-7, and Scrambler in place of the factory “bumperettes”. There is a 7/8 inch hole in the mount for a shackle. The mounts are V-notched prior to welding to ensure a high strenght fillet weld. This item comes in raw metal form and is ready for paint.

This kit includes:
2 bumper mounts
1 bow Shackle
1 grade 8 hardware kit

Specifications:
Material: 1018 hot rolled steel
Length: 8 inches
Width: 3 inches
Thickness: 3/8 inch base plate, 1 inch mount

Heavy duty recovery pull/tow mounts. Designed to bolt on to the rear of 1987-1995 Jeep Wrangler (YJ) in place of the factory “bumperettes”. There is a 7/8 inch hole in the mount for a shackle. The mounts are V-notched prior to welding to ensure a high strenght fillet weld. This item comes in raw metal form and is ready for paint.

This kit includes:
2 bumper mounts
1 bow Shackle
1 grade 8 hardware kit

Specifications:
Material: 1018 hot rolled steel
Length: 10 inches
Width: 3 inches
Thickness: 3/8 inch base plate, 1 inch mount

Heavy duty recovery pull/tow mounts. Designed to bolt or weld to steel bumpers. There is a 7/8 inch hole in the mount for a shackle. The mounts are V-notched prior to welding to ensure a high strenght fillet weld. This item comes in raw metal form and is ready for paint.

This kit includes:
2 bumper mounts
1 bow Shackle

Specifications:
Material: 1018 hot rolled steel
Length: 3 inches
Width: 3 inches
Thickness: 3/8 inch base plate, 1 inch mount